描述 Description

The L6384E is a high voltage gate driver, manufactured with the BCD? “offline” technology, and able to drive a half-bridge of power MOSFET or IGBT devices. The high-side (floating) section is able to work with voltage rail up to 600 V. Both device outputs can sink and source 650 mA and 400 mA respectively and cannot be simultaneously driven high thanks to single input configuration. Further prevention from outputs cross conduction is guaranteed by the deadtime function, tunable by the user through an external resistor connected to the DT/SD pin.

The L6384E device has one input pin, one enable pin (DT/SD) and two output pins, and guarantees matched delays between low-side and high-side sections, thus simplifying device's high frequency operation. The logic inputs are CMOS/TTL compatible to ease the interfacing with controlling devices. The bootstrap diode is integrated inside the device, allowing a more compact and reliable solution.

The L6384E features the UVLO protection and a voltage clamp on the VCCsupply voltage. The voltage clamp is typically around 15.6 V and is useful in order to ensure a correct device functioning in cases where VCCsupply voltage is ramped up too slowly or is subject to voltage drops.

The device is available in a DIP-8 tube and SO-8 tube and tape and reel packaging options.

特性 Features

? High voltage rail up to 600 V
? dV/dt immunity ± 50 V/nsec in full temperature range
? Driver current capability
?400 mA source
?650 mA sink
? Switching times 50/30 nsec rise/fall with 1 nF load
? CMOS/TTL Schmitt trigger inputs with hysteresis and pull-down
? Shutdown input
? Deadtime setting
? Undervoltage lockout
? Integrated bootstrap diode
? Clamping on VCC
? Available in DIP-8/SO-8 packages

簡介

L6384E屬于集成電路（IC）的柵極驅動器。由制造生產的L6384E柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。