Features

Hardware compatible with KT0806

Additional features to KT0806

Software standby;

Automatic power down power amplifier

when silence is detected;

Multiple reference clock support

including from 32.768KHz to 26MHz;

ALC (Automatic Level Control)

Higher SNR (66dB)

Increased audio frequency response

Software controlled XTAL selection

Professional Grade Performance:

SNR ≥ 66 dB

Stereo Separation > 40 dB

International compatible 70MHz ~ 108MHz

Ultra-Low Power Consumption:

< 17 mA operation current

< 3 μA standby current

Small Form Factor:

16-pins QFN 3x3

Simple Interface:

Single power supply

Standard 2-wire I2

C MCU interface

Advanced Digital Audio Signal Processing:

On-chip 20-bit ΔΣ Audio ADC

On-chip DSP core

On-chip 24dB PGA with optional 1dB step

Automatic calibration against process

and temperature

1.6V ~ 3.6V supply

Programmable transmit level

Programmable pre-emphasis (50/75 μs)

Pb-free and RoHS Compliant

Applications

MP3 Player, Cellular Phone, PDA, PND,

Portable Personal Media player and its accessory,

Laptop Computer, Wireless Speaker

? General Description

KT0806L, our new generation of low cost Monolithic

Digital FM Transmitter, is designed to process high-fidelity

stereo audio signal and transmit modulated FM signal over

a short range. It’s based on the architecture of awardwinning KT0801 and it’s also an upgrade of KT0806. The

additional features added to KT0806L are standby mode

through software, ALC (automatic level control), multiple

reference clock, increased SNR performance and frequency

response.

The KT0806L features dual 20-bit ΔΣ audio ADCs, a highfidelity digital stereo audio processor and a fully integrated

radio frequency (RF) transmitter. An on-chip low-drop-out

regulator (LDO) allows the chip to be integrated in a wide

range of low-voltage battery-operated systems with power

supply ranging from 1.6V to 3.6V.

The KT0806L is configured as an I2

C slave and

programmed through the industry standard 2-wire MCU

interface.

Thanks to its high integration level, the KT0806L is

mounted in a generic 16-pin QFN package. It only requires

a single low-voltage supply. No external tuning is required

that makes design-in effort minimum