KSZ8041NL屬于集成電路（IC）的驅動器接收器收發器。由微芯科技股份有限公司制造生產的KSZ8041NL驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

DESCRIPTION

Some KSZ8041 devices may exhibit receiver errors after the software power down bit (register 0h, bit 11), is set and then cleared. The problem only occurs following software power down. There is no issue following power up or hardware reset.

END USER IMPLICATIONS

When the failure occurs:

? The RXER pin is asserted randomly

? The RXER counter (register 15h) increments

? The RXER interrupt bit (register 1Bh, bit 6) is set

? 100BASE-TX receive side exhibits errors (transmit side functions properly)

? 10BASE-T transmit and receive function properly

The only ways to exit the failure condition are:

? Cycle power off and on

? Set and clear the software power down bit (this method may resolve the issue, but is not guaranteed)