描述 Description

The KSZ8001 is a 10BASE-T/100BASE-TX/100BASE-FX Physical Layer Transceiver, powered by a single 3.3v supply.With core operation at 1.8 volts the device is low power, consuming typically 172mW.



The solution provides MII/RMII/SMII host interfaces commonly available on Microcontrollers, Microprocessors or FPGA's with integrated IEEE 802.3 MACs. A unique mixed-signal design extends signaling distance while reducing power consumption. HP Auto MDI/MDI-X provides the most robust solution for eliminating the need to differentiate between crossover and straight-through cables.



Featuring LinkMD cable diagnostics, which allows detection of common cabling plant problems such as open and short circuits, the KSZ8001 represents a new level of features and performance and is an ideal choice of physical layer transceiver.



Microchip's complimentary and confidential LANCheck? online design review service is available for customers who have selected our products for their application design-in.?The?LANCheck online design review?service is subject to?Microchip's?Program Terms and Conditions?and requires a myMicrochip?account.

特性 Features

? Single chip 100BASE-TX/100BASE-FX/10BASE-T physical layer solution
? 1.8V CMOS design, power consumption 250 mW
? Robust (130m+) operation over standard cables
? Supports Media Independent Interface (MII), Reduced MII (RMII), and Serial MII (SMII)
? LinkMD feature to determine cable length and diagnose faulty cables up 200m with ±2m accuracy
? Configurable through MII serial management port or via external control pins
? Programmable LED outputs for link, activity, full/half duplex, collision, and speed
? On-chip built-in analog front end filtering for both 100BASE-TX and 10BASE-T
? Supports HP MDI/MDI-X auto crossover
? Supports power down mode and power saving mode
? MDC/MDIO to 12.5 MHz for rapid configuration
? Fully compliant to IEEE 802.3u standard
? Supports auto-negotiation and manual selection for 10/100Mbps speed and full/half-duplex mode
? Supports back-to-back, 100BASE-FX to 100BASE-TX for media converter applications
? Single 3.3V power supply with built-in 1.8V regulator (‘L’ parts)
? Available in 48-Pin LQFP and 48-Pin SSOP packages

簡介

KSZ8001屬于集成電路（IC）的驅動器接收器收發器。由制造生產的KSZ8001驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。