1 Features

? FMCW transceiver

– Integrated PLL, transmitter, receiver, baseband,

and ADC

– 57- to 64-GHz coverage with 7 GHz available

bandwidth

– Four receive channels

– Three transmit channels

– Supports 6-bit phase shifter for TX Beam

forming

– Ultra-accurate chirp engine based on

Fractional-N PLL

– TX power: 12 dBm

– RX noise figure: 10 dB

– Phase noise at 1 MHz:

? –93dBc/Hz

? Built-in calibration and self-test

– Self-calibrating system across process and

temperature

? Host interface

– Control interface with external processor over

SPI or I2C interface

– Data interface with external processor over

MIPI D-PHY, CSI2 v1.1 and LVDS (only for

debug)

– Interrupts for Fault Reporting

? Functional Safety-Compliant

– Developed for functional safety applications

– Documentation available to aid IEC 61508

functional safety system design up to SIL 3

– Hardware integrity up to SIL-2

– Safety-related certification

? IEC 61508 certified SIL-2 by TUV SUD

? IWR6243 Advanced features

– Embedded self-monitoring with limited Host

processor involvement

– Complex baseband architecture

– Option of cascading multiple devices to

increase channel count

– Embedded interference detection capability

? Power management

– Built-in LDO Network for enhanced PSRR

– I/Os support dual voltage 3.3 V/1.8 V

? Clock source

– Supports externally driven clock (square/sine)

at 40 MHz

– Supports 40 MHz crystal connection with load

capacitors

? Easy hardware design

– 0.65-mm pitch, 161-pin 10.4 mm × 10.4 mm

flip chip BGA package for easy assembly and

low-cost PCB design

– Small solution size

? Operating Condtions :

– Junction temp range: –40°C to 105°C

2 Applications

? Industrial sensor for measuring range, velocity, and

angle

? Building automation

? Displacement sensing

? Gesture recognition

? Robotics

? Traffic monitoring

? Proximity and position sensing

? Security and surveillance

? Factory automation safety guards

? People counting

? Motion detection

? Occupancy detection

3 Description

The IWR6243 is an integrated single-chip FMCW transceiver capable of operation in the 57- to 64-GHz band.

This device enables unprecedented levels of integration in an extremely small form factor. IWR6243 is an ideal

solution for low power, self-monitored, ultra-accurate radar systems in the industrial space.

IWR6243 is a self-contained FMCW transceiver single-chip solution that simplifies the implementation of Radar

sensors. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of

a 3TX, 4RX system with built-in PLL and ADC converters. Simple programming model changes can enable

a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for

implementing a multimode sensor.

Additionally, the device is provided as a complete platform solution including reference hardware design,

software drivers, sample configurations, API guide, and user documentation.