1 Features

1? Highest Signaling Rate: 1 Mbps

? Low Power Consumption, Typical I CC per Channel

(3.3-V operation):

– ISO7420: 1.1 mA, ISO7421: 1.5 mA

? Low Propagation Delay – 9 ns Typical

? Low Skew – 300 ps Typical

? Wide TA Range: –40°C to 125°C (M-Grade)

? 50-kV/μs Transient Immunity, Typical

? Over 25-Year Isolation Integrity at Rated Voltage

? Operates From 3.3-V and 5-V Supply and Logic

Levels

? 3.3-V and 5-V Level Translation

? Narrow Body SOIC-8 Package

? Safety and Regulatory Approvals:

– 4242 VPK Isolation per DIN V VDE V 0884-10

and DIN EN 61010-1

– 2500 VRMS Isolation for 1 minute per UL 1577

– CSA Component Acceptance Notice 5A, IEC

60950-1 and IEC 61010-1 Standards

– CQC Certification per GB4943.1-2011

2 Applications

? Optocoupler Replacement in:

– Industrial Fieldbus

– Profibus

– Modbus

– DeviceNet? Data Buses

– Servo Control Interface

– Motor Control

– Power Supplies

– Battery Packs

3 Description

The ISO7420, ISO7420M and ISO7421 provide

galvanic isolation up to 2500 VRMS for 1 minute per

UL. These digital isolators have two isolated

channels. Each isolation channel has a logic input

and output buffer separated by a silicon dioxide

(SiO2) insulation barrier. Used in conjunction with

isolated power supplies, these devices prevent noise currents on a data bus or other circuit from entering

the local ground and interfering with or damaging

sensitive circuitry. The suffix M indicates wide

temperature range (–40°C to 125°C).

These devices have TTL input thresholds and require

two supply voltages, 3.3 or 5 V, or any combination.

All inputs are 5-V tolerant when supplied from a 3.3-V supply.

Note: The ISO7420 and ISO7421 are specified for signaling rates up to 1 Mbps. Due to their fast

response time, under most cases, these devices will

also transmit data with much shorter pulse widths.

Designers should add external filtering to remove

spurious signals with input pulse duration <20 ns if

desired.