DESCRIPTION

The IR3080 Control IC combined with an IR XPhaseTM Phase IC provides a full featured and flexible way to implement a complete VRD 10 power solution. The “Control” IC provides overall system control and interfaces with any number of “Phase ICs” which each drive and monitor a single phase of a multiphase converter. The XPhaseTM architecture results in a power supply that is smaller, less expensive, and easier to design while providing higher efficiency than conventional approaches.

FEATURES

? 6 bit VR10 compatible VID with 0.5 overall system accuracy

? 1 to X phases operation with matching phase ICs

? On-chip 700? VID Pull-up resistors with VID pull-up voltage input

? Programmable Dynamic VID Slew Rate

? No Discharge of output capacitors during Dynamic VID step-down (can be disabled)

? +/-300mV Differential Remote Sense

? Programmable 150kHz to 1MHz oscillator

? Programmable VID Offset and Load Line output impedance

? Programmable Softstart

? Programmable Hiccup Over-Current Protection with Delay to prevent false triggering

? Simplified Powergood provides indication of proper operation and avoids false triggering

? Operates from 12V input with 9.1V Under-Voltage Lockout

? 6.8V/5mA Bias Regulator provides System Reference Voltage

? 1.2V @ 150mA VCCVID Linear Regulator with Full Protection

? VCCVID Powergood with Programmable delay gates converter operation

? Programmable Converter Over-Temperature Detection and Output

? Small thermally enhanced 32L MLPQ package