characteristic

　Support multiple USB ports at the same time

? 1 USB A port output

? 1 USB B port input

? 1 USB C port input output

　Fast charging specifications

? Any port supports fast charging

? Integrated QC2.0/QC3.0 output fast charging protocol

? Integrated FCP input and output fast charging protocol

?Integrated AFC input and output fast charging protocol

?Integrated SFCP output fast charging protocol

?Integrated MTK PE+ 1.1&2.0 output fast charging protocol

? Integrated USB C DRP protocol, supports input and output fast charging

? Compatible with BC1.2, Apple and Samsung mobile phone fast charging

　Integrated USB Power Delivery PD2.0/PD3.0) protocol

? Support PD2.0 bidirectional input and output protocol

?Support PD 3.0 input and output

?Supports 5V 9V 12V voltage range input

?Supports 5V 9V 12V voltage range output

? Integrated hardware bidirectional mark coding and decoding (BMC) protocol

? Integrated physical layer protocol (PHY

?Integrated hardware CRC

?Support Hard Reset

　Charging specifications

? Battery end charging current can reach up to 5 0 A

? Adaptive charging current adjustment

?Supports 4.20V, 4.35V, 4.40V, 4.50V batteries

　Discharge specifications

? Output current capability:

5V

3.1A 9V 2.0A 12V 1.5A

? Synchronous switch discharge 5V 2A efficiency reaches more than 9 5

?Support line compensation

　Battery display

? Built-in 14bit ADC and fuel gauge

?Supports 1 / 2 / 3 / 4 LED power display

? Intelligent recognition of the number of LED battery indicator lights

? Adjustable battery power curve, more uniform display lights

　Other functions

? Automatically detect when the phone is plugged in and out

? Fast charging status indicator

? Intelligent identification of load, automatic enter standby under light load

?Support buttons

? Built-in lighting driver

　Multiple protections and high reliability

? Input overvoltage and undervoltage protection

? Output over-current, over-voltage and short-circuit protection

? Battery overcharge, over-discharge, and over-current protection

? IC over-temperature protection

? Charge and discharge battery temperature NTC protection

? ESD 4KV input (including CC pin) withstand voltage 2 5 V

　BOM minimalist

? Built-in switching power MOS

? Single inductor realizes charging and discharging functions

　In-depth customization

? I2C interface, flexible and low-cost customized solutions

　Package specification: 5 mm × 5 mm 0.5pitch QFN 32

Overview

IP5332

It is an integrated QC2.0/QC3.0, FCP/AFC input and output

Output fast charging protocol, SFCP output fast charging protocol, MTK PE+ 1.1&2.0 output

Fast charging protocol, USB C PD2.0/PD3.0 input and output protocol, USB C

PD3.0 output protocol, compatible with BC1.2 Apple and Samsung mobile phones, synchronous step-up and step-down

Converter, lithium battery charging management, battery power indicator and other multi-functional power tubes

Manage SOC to provide a complete power solution for fast charging mobile power. Can be the same

It supports three USB ports: USB A, USB B, USB C, which can be used individually.

Any USB port can support fast charging, when using two output ports at the same time

Only supports 5V.

IP5332

With high integration and rich functions, only one inductor is needed to reduce

voltage and boost functions, only a few peripheral components are needed during application, effectively reducing the overall

The size of the overall solution reduces the BOM cost.

IP5332

Synchronized switching boost system provides maximum output capability of 18W

Even when the battery voltage is low, the output of 18W can still maintain an efficiency of more than 90.

When no-load, it automatically enters sleep state.

IP5332

Synchronized switching charging system, providing up to 50 A charging current.

Built-in IC temperature, battery temperature and input voltage control loop, intelligently adjust charging

electrical current.

IP5332

Built-in USB C & PD 3.0 protocols.

IP5332

Built-in 14bit ADC, accurately measures battery voltage and current, can

Access ADC data via I2C. IP5332 has a built-in power calculation method that can accurately

Get battery level information. Customizable battery power curve to accurately display battery

power.

IP5332

Supports 1/2/3/4 LED power display, intelligent identification of power

Display mode; supports lighting function; supports buttons.

Customizable features:

Charging and discharging at the same time, PD15V output, for wearable devices

Charging and other functions.

Application products

　Mobile power supply, power bank

? Mobile phones, tablets and other portable devices