最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

HEF4094BT

8-stage shift-and-store bus register

DESCRIPTION TheHEF4094Bisan8-stageserialshiftregisterhavingastoragelatchassociatedwitheachstageforstrobingdatafromtheserialinputtoparallelbuffered3-stateoutputsO0toO7.Theparalleloutputsmaybeconnecteddirectlytocommonbuslines.

HEF4094BT

8-stage shift-and-store register

1.Generaldescription TheHEF4094Bisan8-bitserial-in/serialorparallel-outshiftregisterwithastorageregisterand 3-stateoutputs.Boththeshiftandstorageregisterhaveseparateclocks.Thedevicefeaturesa serialinput(D)andtwoserialoutputs(QS1andQS2)toenablecascading.

HEF4094BT

8-stage shift-and-store register; ? Fully static operation\n? 5 V, 10 V, and 15 V parametric ratings\n? Standardized symmetrical output characteristics\n? Specified from -40 °C to +85 °C and -40°C to +125°C\n? Complies with JEDEC standard JESD 13-B\n;

The HEF4094B is an 8-stage serial shift register. It has a storage latch associated with each stage for strobing data from the serial input to parallel buffered 3?state outputs QP0 to QP7. The parallel outputs may be connected directly to common bus lines. Data is shifted on positive?going clock transitions. The data in each shift register stage is transferred to the storage register when the strobe (STR) input is HIGH. Data in the storage register appears at the outputs whenever the output enable (OE) signal is HIGH.\n Two serial outputs (QS1 and QS2) are available for cascading a number of HEF4094B devices. Serial data is available at QS1 on positive?going clock edges to allow high?speed operation in cascaded systems with a fast clock rise time. The same serial data is available at QS2 on the next negative going clock edge. This is used for cascading HEF4094B devices when the clock has a slow rise time.\n It operates over a recommended VDD power supply range of 3V to 15V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.\n

HEF4094BT

8-stage shift-and-store register

HEF4094BT-Q100

8-stage shift-and-store register

1.Generaldescription TheHEF4094B-Q100isan8-bitserial-in/serialorparallel-outshiftregisterwithastorageregister and3-stateoutputs.Boththeshiftandstorageregisterhaveseparateclocks.Thedevicefeatures aserialinput(D)andtwoserialoutputs(QS1andQS2)toenablecasca

HEF4094BTS

8-stage shift-and-store register; ? Fully static operation\n? 5 V, 10 V, and 15 V parametric ratings\n? Standardized symmetrical output characteristics\n? Specified from -40 °C to +85 °C and -40°C to +125°C\n? Complies with JEDEC standard JESD 13-B\n;

The HEF4094B is an 8-stage serial shift register. It has a storage latch associated with each stage for strobing data from the serial input to parallel buffered 3?state outputs QP0 to QP7. The parallel outputs may be connected directly to common bus lines. Data is shifted on positive?going clock transitions. The data in each shift register stage is transferred to the storage register when the strobe (STR) input is HIGH. Data in the storage register appears at the outputs whenever the output enable (OE) signal is HIGH.\n Two serial outputs (QS1 and QS2) are available for cascading a number of HEF4094B devices. Serial data is available at QS1 on positive?going clock edges to allow high?speed operation in cascaded systems with a fast clock rise time. The same serial data is available at QS2 on the next negative going clock edge. This is used for cascading HEF4094B devices when the clock has a slow rise time.\n It operates over a recommended VDD power supply range of 3V to 15V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.\n

HEF4094BTT

8-stage shift-and-store register; ? Fully static operation\n? 5 V, 10 V, and 15 V parametric ratings\n? Standardized symmetrical output characteristics\n? Specified from -40 °C to +85 °C and -40°C to +125°C\n? Complies with JEDEC standard JESD 13-B\n;

The HEF4094B is an 8-stage serial shift register. It has a storage latch associated with each stage for strobing data from the serial input to parallel buffered 3?state outputs QP0 to QP7. The parallel outputs may be connected directly to common bus lines. Data is shifted on positive?going clock transitions. The data in each shift register stage is transferred to the storage register when the strobe (STR) input is HIGH. Data in the storage register appears at the outputs whenever the output enable (OE) signal is HIGH.\n Two serial outputs (QS1 and QS2) are available for cascading a number of HEF4094B devices. Serial data is available at QS1 on positive?going clock edges to allow high?speed operation in cascaded systems with a fast clock rise time. The same serial data is available at QS2 on the next negative going clock edge. This is used for cascading HEF4094B devices when the clock has a slow rise time.\n It operates over a recommended VDD power supply range of 3V to 15V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.\n

HEF4094BTT

8-stage shift-and-store register

1.Generaldescription TheHEF4094Bisan8-bitserial-in/serialorparallel-outshiftregisterwithastorageregisterand 3-stateoutputs.Boththeshiftandstorageregisterhaveseparateclocks.Thedevicefeaturesa serialinput(D)andtwoserialoutputs(QS1andQS2)toenablecascading.

HEF4094BTT-Q100

8-stage shift-and-store register

1.Generaldescription TheHEF4094B-Q100isan8-bitserial-in/serialorparallel-outshiftregisterwithastorageregister and3-stateoutputs.Boththeshiftandstorageregisterhaveseparateclocks.Thedevicefeatures aserialinput(D)andtwoserialoutputs(QS1andQS2)toenablecasca

HEF4094BTD-T

8-stage shift-and-store register