最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

HEF4053BT-Q100

Triple single-pole double-throw analog switch; ? Automotive product qualification in accordance with AEC-Q100 (Grade 1)? Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n? Fully static operation\n? 5 V, 10 V, and 15 V parametric ratings\n? Standardized symmetrical output characteristics\n? ESD protection:? MIL-STD-883, method 3015 exceeds 2000 V\n? HBM JESD22-A114F exceeds 2000 V\n? MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)\n\n? Complies with JEDEC standard JESD 13-B\n;

The HEF4053B-Q100 is a triple single-pole double-throw (SPDT) analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input (Sn), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). All three switches share an enable input (E). A HIGH on E causes all switches into the high-impedance OFF-state, independent of Sn.\n VDD and VSS are the supply voltage connections for the digital control inputs (Sn and E). The VDD to VSS range is 3 V to 15 V. The analog inputs/outputs (nY0, nY1 and nZ) can swing between VDD as a positive limit and VEE as a negative limit. VDD - VEE may not exceed 15 V. Unused inputs must be connected to VDD, VSS, or another input. For operation as a digital multiplexer/demultiplexer, VEE is connected to VSS (typically ground). VEE and VSS are the supply voltage connections for the switches.\n This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.\n

HEF4053BTT

Triple single-pole double-throw analog switch; ? Fully static operation\n? 5 V, 10 V, and 15 V parametric ratings\n? Standardized symmetrical output characteristics\n? Specified from -40 ℃ to +125 ℃\n? Complies with JEDEC standard JESD 13-B\n;

The HEF4053B is a triple single-pole double-throw (SPDT) analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input (Sn), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). All three switches share an enable input (E). A HIGH on E causes all switches into the high-impedance OFF?state, independent of Sn.\n VDD and VSS are the supply voltage connections for the digital control inputs (Sn and E). The VDD to VSS range is 3V to 15V. The analog inputs/outputs (nY0, nY1 and nZ) can swing between VDD as a positive limit and VEE as a negative limit. VDD - VEE may not exceed 15V. Unused inputs must be connected to VDD, VSS, or another input. For operation as a digital multiplexer/demultiplexer, VEE is connected to VSS (typically ground). VEE and VSS are the supply voltage connections for the switches.\n

HEF4053BTT

Triple single-pole double-throw analog switch

1.Generaldescription TheHEF4053Bisatriplesingle-poledouble-throwanalogswitch(3xSPDT)suitableforusein analogordigital2:1multiplexer/demultiplexerapplications.Eachswitchfeaturesadigitalselect input(Sn),twoindependentinputs/outputs(Y0andY1)andacommoninput/outp

HEF4053B_15

Triple single-pole double-throw analog switch

HEF4053B-Q100

Triple single-pole double-throw analog switch

HEF4053BT652

Triple single-pole double-throw analog switch

HEF4053BT-Q100

Triple single-pole double-throw analog switch

HEF4053BTT-Q100

Triple single-pole double-throw analog switch