最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

HEF4052BTT-Q100

Dual 4-channel analog multiplexer/demultiplexer

1.Generaldescription TheHEF4052B-Q100isadualsingle-polequad-throwanalogswitch(2xSP4T)suitableforusein analogordigital4:1multiplexer/demultiplexerapplications.Eachswitchfeaturesfourindependent inputs/outputs(nY0,nY1,nY2andnY3)andacommoninput/output(nZ).Adigi

HEF4052BTT-Q100

Dual 4-channel analog multiplexer/demultiplexer; ? Automotive product qualification in accordance with AEC-Q100 (Grade 1)? Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n? Fully static operation\n? 5 V, 10 V, and 15 V parametric ratings\n? Standardized symmetrical output characteristics\n? ESD protection:? MIL-STD-833, method 3015 exceeds 2000 V\n? HBM JESD22-A114F exceeds 2000 V\n? MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)\n\n? Complies with JEDEC standard JESD 13-B\n;

The HEF4052B-Q100 is a dual 4-channel analog multiplexer/demultiplexer with common channel select logic. Each multiplexer/demultiplexer has four independent inputs/outputs (nY0 to nY3) and a common input/output (nZ). The common channel select logic includes two select inputs (S1 and S2) and an active LOW enable input (E). Both multiplexers/demultiplexers contain four bidirectional analog switches, each with one side connected to an independent input/output (nY0 to nY3) and the other side connected to a common input/output (nZ). With E LOW, one of the four switches is selected (low-impedance ON-state) by S1 and S2. With E HIGH, all switches are in the high-impedance OFF-state, independent of S1 and S2. If break before make is needed, then it is necessary to use the enable input.\n VDD and VSS are the supply voltage connections for the digital control inputs (S1 and S2, and E). The VDD to VSS range is 3 V to 15 V. The analog inputs/outputs (nY0 to nY3, and nZ) can swing between VDD as a positive limit and VEE as a negative limit. VDD - VEE may not exceed 15 V. Unused inputs must be connected to VDD, VSS, or another input. For operation as a digital multiplexer/demultiplexer, VEE is connected to VSS (typically ground). VEE and VSS are the supply voltage connections for the switches.\n This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.\n