描述 Description

HAL 810和HAL 817是可編程線性霍爾傳感器，可用于角度或者距離測量。主要參數是在非易失內存中進行編程的。HAL 817有比例輸出特性。輸出電壓與磁通量和供電電壓成比例。HAL 810提供脈寬調制輸出。產品有帶斬波偏置補償?shù)臏囟妊a償霍爾片，交流直流轉換器，為標定數據而設的冗余和鎖定功能，以及各引腳的保護裝置。數據信號處理，模擬偏置，溫度飄移和機械應力都不會降低傳感器的精確性。傳感器、磁場和機械位置形成的偏差可以由客戶／用戶在最后裝配時通過編程來補償。這是對近來需要機械調整或者激光修正來標定的各種應用的低成本替代方案。HAL 810和HAL 817設計適用于惡劣環境下的汽車和工業應用，供電電壓5伏，溫度從?40 °C 到 170 °C注：HAL 817替代以前版本的HAL 805和HAL 815。封裝是小尺寸含鉛TO92UT。

特性 Features

·Sensitivity drift over temperature less than ±400 ppm/K
·Offset drift over temperature less than ±10 μT/K
·Integral non-linearity error of output signal ±0.5% of VDD
·Ratiometric error of output signal ±0.5%
·Low output noise of 6 mV RMS
·Wire break detection
·Programmable magnetic ranges between ±30 and ±150 mT
·Five programmable 3 dB filter frequencies
·Programmable sensitivity, offset (VOQ) and clamping
·12-bit ratiometric analog output
·Digital signal processing
·Temperature characteristics programmable to match all common magnetic materials
·Programming by modulation of the supply voltage
·Operates with static magnetic fields and dynamic magnetic fields up to 2 kHz
·Short-circuit protected push-pull output
·Overvoltage and reverse-voltage protection at all pins
·Operates from –40 °C up to 170 °C junction temperature
·Operates from 4.5 V up to 5.5 V supply voltage
·Magnetic characteristics extremely robust against mechanical stress