描述 Description

The FUSB302T targets system designers looking to implement a USB Type-C wall charger or Travel Adaptor. In addition to the default SRC function, the device supports DRP/ SRC/ SNK with low amount of programmability. The FUSB302T enables the USB Type-C detection including attach/detach, and orientation. The FUSB302T integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.Reference code is available for the FUSB302T for easy implementation of Type-C and USB BMC Power Delivery protocol across several embedded controller platforms. Click on the Software link below.

特性 Features

? Dual-Role Functionality with Autonomous DRP Toggle
? Applicable to many end systems
? Ability to connect as either a host or a device based on what has been attached
? Autonomous detection
? Software configurable either as a dedicated host, dedicated device, or dual role
? Offers programmability
? Dedicated devices can operate both on a Type-C receptacle or a Type-C plug with a fixed CC and VCONN channel.
? Flexibility
? Full Type-C 1.2 Support. Integrates the following functionality of the CC pin
? Meets compliance standards
? Audio Adapter Accessory Mode
? Supports USB-C audio
? Debug Accessory Mode
? Supports accessory detection
? Supports accessory detection
? Meets compliance standards
? Active Cable Detection
? Supports advance cable solutions
? Attach/Detach Detection as Host
? Current Capability Indication as Host
? Current Capability Detection as Device
? Integrates CCx to VCONN switch with over-current limiting for powering USB3.1 Full Featured cables
? Automatic GoodCRC Packet Response
? Automatic soft reset packet sent with retries if needed
? Automatic retries of sending a packet if a GoodCRC is not received
? Default CC open for SRC application.
? Automatic Hard Reset Ordered Set Sent
? Low Power Operation: ICC = 25 μA (Typical)

應用 Application

? Automotive
? PCs
? Mobile
? Wired Communication
? Desktop PCs
? Infotainment
? Mobile Handsets
? Tablets
? Travel Adapters

簡介

FUSB302TV11MPX屬于集成電路（IC）的控制器。由制造生產的FUSB302TV11MPX控制器該系列產品主要用于在采用不同通信協議和/或信令方法的端點之間提供信息連接。示例包括將 I2C 總線連接到 UART，將 USB 連接到 I2C、SPI、以太網或 UART、以太網 MAC 和 PHY 等的器件。此外，還包括用于通過為點對點通信設計的接口建立多路連接的器件，例如 USB 集線器控制器。