FH12A-15S-0.5SH屬于連接器互連器件的FFC、FPC（扁平柔性）連接器組件。由日本廣瀨電機株式會社制造生產的FH12A-15S-0.5SHFFC、FPC（扁平柔性）連接器組件該系列產品是結合扁平柔性電纜 (FFC) 和柔性印刷電路板 (FPC) 材料使用的互連產品，主要用于執(zhí)行電纜到板的互連功能，并且安裝在印刷電路板上，為插入的 FFC 或 FPC 電纜同時提供電氣連接和機械固定。

■Features

1. Ease of Use and Space Savings

Only one finger or 6.9N (Newtons) of force is required to lock Hirose’s rotational actuator (flip-lock) as compared to using 2 fingers and 39.2N to close a FFC/FPC connector from our competition. The Flip-Lock design also allows customers to place 2 or more connectors side by side as there is no need to waste additional board space for a side latch.

2. Strengthened Flip-lock Actuator

The standard Flip-Lock requires only 2.0mm height above the board. A strengthened lock lever is available which only requires an additional 0.4mm.

3. Supports Thin FPC (0.18mm)

Hirose does not require double-sided FPC to have any additional strengthening plate or stiffener and can

therefore support a thickness of as little as 0.18mm +/- 0.05.

4. Hirose Ensures Reliability

Hirose’s patented half tuning fork contacts maintain the required normal force without relying on the connector housing. With our competitor’s conventional products the housing walls support the contact force,

which does not provide for long-term reliability.

5. Prevention of Solder Bridge

Excess solder cavity absorbs excessive solder and avoids solder bridging.

6. Three different assembly types

FH12 is offered in Top & Bottom Contact and Vertical Mount and offered in both a 0.5mm contact pitch as well as a 1.0mm contact pitch (bottom contact only).