EVAL-ADM3051EBZ屬于開發板套件編程器的評估演示板及套件。由亞德諾半導體技術有限公司制造生產的EVAL-ADM3051EBZ評估和演示板及套件該系列產品提供了一種方便的方法，在經過驗證的實施環境中評估某些重點器件的性能或特性。評估方法通常有完善的文檔說明，并且視乎具體情況由評估軟件提供支持。產品通常由印刷電路板組成，板上已裝有重點器件以及必要或有用的支持元器件，另外也可能包括其他組件，例如電纜或電源。對于數量特別多或類別獨特的器件類別(如 ADC、DAC 和開關模式電源)，評估平臺可組合為一個單獨的產品系列。

GENERAL DESCRIPTION

The ADM3051 is a controller area network (CAN) physical

layer transceiver allowing a protocol layer CAN controller to access the physical layer bus. The ADM3051 complies with the ISO 11898 standard. It is capable of running at data rates up to 1 Mbps. The device has current-limiting and thermal shutdown features

to protect against output short circuits and situations where the

bus may be shorted to ground or power terminals in 24 V bus power systems. The part is fully specified over the industrial

temperature range of ?40°C to +125°C and is available in an 8-lead SOIC package.

Three operating modes are available: high speed, slope control, and standby. Pin 8 (RS) is used to select the operating mode.

The low current standby mode can be selected by applying a

logic high to RS. The device can be set to operate with slope control to limit EMI

by connecting RS with a resistor to ground to modify the rise and fall of slopes. This mode facilitates the use of unshielded cables. Alternatively, disabling slope control by connecting RS to ground allows high speed operation. Shielded cables or other measures to control EMI are necessary in this mode.

FEATURES Physical layer CAN transceiver

5 V operation on VCC

Complies with ISO 11898 standard High speed data rates up to 1 Mbps Short-circuit protection on CANH and CANL against shorts to

power/ground in 24 V systems Unpowered nodes do not disturb the bus Connect 110 or more nodes on the bus Slope control for reduced EMI Thermal shutdown protection Low current standby mode

Industrial operating temperature range (?40°C to +125°C) Available in 8-lead SOIC package

APPLICATIONS

CAN data buses

Industrial field networks DeviceNet applications

CanOpen, CanKingdom