DS92LV090A屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的DS92LV090A驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1FEATURES

2? Bus LVDS Signaling

? 3.2 Nanosecond Propagation Delay Max

? Chip to Chip Skew ±800ps

? Low Power CMOS Design

? High Signaling Rate Capability (Above 100

Mbps)

? 0.1V to 2.3V Common Mode Range for VID =

200mV

? ±100 mV Receiver Sensitivity

? Supports Open and Terminated Failsafe on

Port Pins

? 3.3V Operation

? Glitch Free Power Up/Down (Driver & Receiver

Disabled)

? Light Bus Loading (5 pF Typical) per Bus

LVDS Load

? Designed for Double Termination Applications

? Balanced Output Impedance

? Product Offered in 64 Pin LQFP Package

? High Impedance Bus Pins on Power off (VCC =

0V)

? Driver Channel to Channel Skew (Same

Device) 230ps Typical

? Receiver Channel to Channel Skew (Same

Device) 370ps Typical

DESCRIPTION

The DS92LV090A is one in a series of Bus LVDS

transceivers designed specifically for the high speed,

low power proprietary backplane or cable interfaces.

The device operates from a single 3.3V power supply

and includes nine differential line drivers and nine

receivers. To minimize bus loading, the driver outputs and receiver inputs are internally connected. The

separate I/O of the logic side allows for loop back

support. The device also features a flow through pin

out which allows easy PCB routing for short stubs

between its pins and the connector.

The driver translates 3V TTL levels (single-ended) to

differential Bus LVDS (BLVDS) output levels. This

allows for high speed operation, while consuming

minimal power with reduced EMI. In addition, the

differential signaling provides common mode noise

rejection of ±1V.

The receiver threshold is less than ±100 mV over a

±1V common mode range and translates the

differential Bus LVDS to standard (TTL/CMOS)

levels. (See Applications Information Section for more

details.)