1FEATURES

2? Bus LVDS Signaling (BLVDS)

? Designed for Double Termination Applications

? Balanced Output Impedance

? Lite Bus Loading 5pF Typical

? Glitch Free Power Up/Down (Driver Disabled)

? 3.3V or 5.0V Operation

? ±1V Common Mode Range

? ±100mV Receiver Sensitivity

? High Signaling Rate Capability (Above 100

Mbps)

? Low Power CMOS Design

? Product Offered in 8 Lead SOIC Package single?

Industrial Temperature Range Operation

DESCRIPTION

The DS92LV010A is one in a series of transceivers

designed specifically for the high speed, low power

proprietary bus backplane interfaces. The device

operates from a single 3.3V or 5.0V power supply

and includes one differential line driver and one

receiver. To minimize bus loading the driver outputs and receiver inputs are internally connected. The

logic interface provides maximum flexibility as 4

separate lines are provided (DIN, DE, RE, and

ROUT). The device also features flow through which

allows easy PCB routing for short stubs between the

bus pins and the connector. The driver has 10 mA

drive capability, allowing it to drive heavily loaded

backplanes, with impedance as low as 27 Ohms.

The driver translates between TTL levels (single?

ended) to Low Voltage Differential Signaling levels.

This allows for high speed operation, while

consuming minimal power with reduced EMI. In

addition the differential signaling provides common

mode noise rejection of ±1V.

The receiver threshold is ±100mV over a ±1V

common mode range and translates the low voltage

differential levels to standard (CMOS/TTL) levels.