1 Features

1? Automotive Grade Product: AEC-Q100 Grade 2

Qualified

? 10- to 75-MHz PCLK Support

(280-Mbps to 2.1-Gbps FPD-Link II Linerate)

? Compatible to DC Balanced, AC-Coupled for

FPD-Link II Serial Bit Stream

? Capable to Recover Data up to 10 Meters STP

Cable

? MIPI D-PHY Modules Conform to v1.00.00

? Compatible With MIPI CSI-2 Version 1.01

? Supports Data Rate up to 900 Mbps per Data

Lane With Two Lanes

? Video Stream Packet Formats: RGB888

? Continuous and Non-Continuous Clocking Mode

? Ultra Low Power, Escape, High Speed, and

Control Modes Support

? Integrated Input Terminations and Adjustable

Receive Equalization

? Fast Random Lock (No Reference Clock

Required)

? CCI (Camera Control Interface) and I2C

Compatible Control Bus

? @Speed BIST and Reporting Pin

? Single 1.8-V Power Supply

? 1.8-V or 3.3-V Compatible LVCMOS I/O Interface

? 8-kV ISO 10605 ESD Rating

? Leadless 40-Pin WQFN Package (6 mm × 6 mm)

2 Applications

? Automotive Infotainment:

– Central Information Displays

– Rear Seat Entertainment Systems

– Digital Instrument Clusters

3 Description

The DS90UR910-Q1 is an interface bridge chip that

recovers data from the FPD-Link II serial bit stream

and converts into a Camera Serial Interface (CSI-2)

format compatible with Mobile Industry Processor

Interface (MIPI) specifications. It recovers the 24- or

18-bit RGB data and 3 video sync-signals from the

serial bit stream compatible to FPD-Link II serializers.

The recovered data is packetized and serialized over

two data lanes strobed by a half-rate serial clock

compliant with the MIPI DPHY and CSI-2

specifications, each running up to 900 Mbps. The

FPD-Link II receiver supports pixel clocks of up to

75 MHz. The CSI-2 output serial bus greatly reduces

the interconnect and signal count to a graphic

processing unit (GPU) and eases system designs for

video streams from multiple automotive driver assist

cameras.

The DS90UR910-Q1 is available in a 40-pin WQFN

package. Electrical performance is qualified for

automotive AEC-Q100 grade 2 temperature range

–40°C to 105°C.