DS90LV018A屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的DS90LV018A驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1FEATURES

2? >400 Mbps (200 MHz) Switching Rates

? 50 ps Differential Skew (Typical)

? 2.5 ns Maximum Propagation Delay

? 3.3V Power Supply Design

? Flow-Through Pinout

? Power Down High Impedance on LVDS Inputs

? Low Power Design (18mW @ 3.3V Static)

? Interoperable with Existing 5V LVDS Networks

? Accepts Small Swing (350 mV Typical) failDifferential

Signal Levels

? Supports Open, Short and Terminated Input

Fail-Safe

? Conforms to ANSI/TIA/EIA-644 Standard

? Industrial Temperature Operating Range

– (?40°C to +85°C)

? Available in SOIC Package

DESCRIPTION

The DS90LV018A is a single CMOS differential line

receiver designed for applications requiring ultra low

power dissipation, low noise and high data rates. The

device is designed to support data rates in excess of

400 Mbps (200 MHz) utilizing Low Voltage Differential

Signaling (LVDS) technology.

The DS90LV018A accepts low voltage (350 mV

typical) differential input signals and translates them

to 3V CMOS output levels. The receiver also

supports open, shorted and terminated (100Ω) input

fail-safe. The receiver output will be HIGH for all failDifferential

safe conditions. The DS90LV018A has a flow-through

design for easy PCB layout.

The DS90LV018A and companion LVDS line driver

provide a new alternative to high power PECL/ECL

devices for high speed point-to-point interface

applications.