DS34C86T屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的DS34C86T驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1FEATURES

2? CMOS Design for Low Power

? ±0.2V Sensitivity Over the Input Common

Mode Voltage Range

? Typical Propagation Delays: 19 ns

? Typical Input Hysteresis: 60 mV

? Inputs Won't Load Line when VCC = 0V

? Meets the Requirements of EIA Standard RS-

422

? TRI-STATE Outputs for System Bus

Compatibility

? Available in Surface Mount

? Open Input Failsafe Feature, Output High for

Open Input

DESCRIPTION

The DS34C86T is a quad differential line receiver

designed to meet the RS-422, RS-423, and Federal

Standards 1020 and 1030 for balanced and

unbalanced digital data transmission, while retaining

the low power characteristics of CMOS.

The DS34C86T has an input sensitivity of 200 mV

over the common mode input voltage range of ±7V.

Hysteresis is provided to improve noise margin and

discourage output instability for slowly changing input

waveforms.

The DS34C86T features internal pull-up and pulldown

resistors which prevent output oscillation on

unused channels.

Separate enable pins allow independent control of

receiver pairs. The TRI-STATE outputs have 6 mA

source and sink capability. The DS34C86T is pin

compatible with the DS3486.