GENERAL DESCRIPTION

The DS2762 high-precision Li+ battery monitor is a data-acquisition, information-storage, and safety protection device tailored for cost-sensitive battery pack applications. This low-power device integrates precise temperature, voltage, and current measurement, nonvolatile (NV) data storage, and Li+ protection into the small footprint of either a TSSOP package or flip-chip package. The DS2762 is a key component in applications including remaining capacity estimation, safety monitoring, and battery specific data storage.

FEATURES

Li+ Safety Circuit

? Overvoltage Protection

? Overcurrent/Short-Circuit Protection

? Undervoltage Protection

Host Alerted When Accumulated Current or Temperature Exceeds User-Selectable Limits

0V Battery Recovery Charge

Available in Two Configurations:

? Internal 25m
Sense Resistor

? External User-Selectable Sense Resistor

Current Measurement

? 12-Bit Bidirectional Measurement

? Internal Sense Resistor Configuration: 0.625mA LSB and ±1.9A Dynamic Range

? External Sense Resistor Configuration: 15.625V LSB and ±64mV Dynamic Range

Current Accumulation:

? Internal Sense Resistor: 0.25mAhr LSB

? External Sense Resistor: 6.25Vhr LSB

Voltage Measurement with 4.88mV Resolution

Temperature Measurement Using Integrated Sensor with 0.125°C Resolution

System Power Management and Control Feature Support

32 Bytes of Lockable EEPROM

16 Bytes of General-Purpose SRAM

Dallas 1-Wire? Interface with Unique 64-Bit Device Address

Low-Power Consumption:

? Active Current: 60A typ, 90A max

? Sleep Current: 1A typ, 2A max

APPLICATIONS

PDAs

Cell Phones/Smartphones

Digital Cameras