DS26C31TMX/NOPB屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的DS26C31TMX/NOPB驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1 Features

1? TTL Input Compatible

? Typical Propagation Delays: 6 ns

? Typical Output Skew: 0.5 ns

? Outputs Will Not Load Line When VCC = 0 V

? DS26C31T Meets the Requirements of EIA

Standard RS-422

? Operation From Single 5-V Supply

? Tri-State Outputs for Connection to System Buses

? Low Quiescent Current

? Available in Surface Mount

? Mil-Std-883C Compliant

2 Applications

Differential Line Driver for RS-422 Applications

3 Description

The DS26C31 device is a quad differential line driver

designed for digital data transmission over balanced lines. The DS26C31T meets all the requirements of

EIA standard RS-422 while retaining the low power

characteristics of CMOS. The DS26C31M is

compatible with EIA standard RS-422; however, one

exception in test methodology is taken(2). This enables the construction of serial and terminal

interfaces while maintaining minimal power

consumption.

The DS26C31 accepts TTL or CMOS input levels and

translates these to RS-422 output levels. This part

uses special output circuitry that enables the drivers to power down without loading down the bus. This

device has enable and disable circuitry common to all four drivers. The DS26C31 is pin compatible to the

AM26LS31 and the DS26LS31.

All inputs are protected against damage due to

electrostatic discharge by diodes to VCC and ground.