1 Features

1? TTL Input Compatible

? Typical Propagation Delays: 6 ns

? Typical Output Skew: 0.5 ns

? Outputs Will Not Load Line When VCC = 0 V

? DS26C31T Meets the Requirements of EIA

Standard RS-422

? Operation From Single 5-V Supply

? Tri-State Outputs for Connection to System Buses

? Low Quiescent Current

? Available in Surface Mount

? Mil-Std-883C Compliant

2 Applications

Differential Line Driver for RS-422 Applications

3 Description

The DS26C31 device is a quad differential line driver

designed for digital data transmission over balanced lines. The DS26C31T meets all the requirements of

EIA standard RS-422 while retaining the low power

characteristics of CMOS. The DS26C31M is

compatible with EIA standard RS-422; however, one

exception in test methodology is taken(2). This enables the construction of serial and terminal

interfaces while maintaining minimal power

consumption.

The DS26C31 accepts TTL or CMOS input levels and

translates these to RS-422 output levels. This part

uses special output circuitry that enables the drivers to power down without loading down the bus. This

device has enable and disable circuitry common to all four drivers. The DS26C31 is pin compatible to the

AM26LS31 and the DS26LS31.

All inputs are protected against damage due to

electrostatic discharge by diodes to VCC and ground.