DS125DF111屬于集成電路（IC）的專用。由美國德州儀器公司制造生產的DS125DF111專用該系列產品可提供所需的功能，用以將信息源/信宿連到各種復雜或范圍狹窄應用中的傳感器、變送器、致動器、傳輸介質或其他此類端點。例如，汽車安全氣囊驅動器、車身控制和信息娛樂總線、自適應電纜均衡器、智能卡等等。

1 Features

1? Pin Compatible Retimer Family

– DS110DF111 with DFE: 8.5 - 11.3 Gbps

– DS125DF111 with DFE: 9.8 - 12.5 Gbps

? Adaptive CTLE: 33 dB Max Boost at 6.25 GHz

? Self Tuning 5-Tap DFE

? Raw Equalized and Retimed Data Loopback

? Adjustable Transmit V OD: 600 to 1300 mVp-p

? Settable Tx De-Emphasis Driver 0 to –12dB

? Low Power Consumption: 220 mW/Channel

? Locks to Half/Quarter/Eighth Data Rates for

Legacy Support

? On-Chip Eye Monitor (EOM), PRBS Generator

? Input Signal Detection, CDR Lock

Detection/Indicator

? Single 3.3-V or 2.5-V Power Supply

? SMBus, EEPROM, or Pin Based Configuration

? 4-mm x 4-mm, 24-Pin WQFN Package

? Operating Temp Range: –40°C to 85°C

2 Applications

? Front Port Optical Interconnects

? SFF-8431

? 10G/1G Ethernet

? CPRI

3 Description

The DS125DF111 is a dual channel (1-lane

bidirectional) retimer with integrated signal conditioning. The DS125DF111 includes an input

Continuous-Time Linear Equalizer (CTLE), clock and

data recovery (CDR) and transmit driver on each

channel.

The DS125DF111 with its on-chip Decision Feedback

Equalizer (DFE) can enhance the reach and

robustness of long, lossy, cross-talk-impaired high

speed serial links to achieve BER < 1x10–15. For less

demanding applications/interconnects, the DFE can

be switched off and achieve the same BER

performance. The DS125DF111 and DS110DF111 devices are pin-compatible.

Each channel of the DS125DF111 independently locks to specific serial data at data rates from 9.8 to

12.5 Gbps or to any supported sub-rate of these data

rates. This simplifies system design and lowers

overall cost.

Programmable transmit de-emphasis driver offers

precise settings to meet the SFF-8431 output eye

template. The fully adaptive receive equalization

(CTLE and DFE) enables longer distance transmission in lossy copper interconnect and

backplanes with multiple connectors. The CDR

function is ideal for use in front port parallel optical

module applications to reset the jitter budget and retime high speed serial data.