DAC7513E/250屬于集成電路（IC）的數模轉換器（DAC）。由美國德州儀器公司制造生產的DAC7513E/250數模轉換器（DAC）數模轉換器（DAC、D/A、D2A 或 D 轉 A）可將數字信號轉換為緩沖或無緩沖的模擬電壓或電流。DAC 架構是否適合特定應用，要取決于分辨率和采樣頻率。DAC 通常用于音樂播放器，將數字數據流轉換為模擬音頻流。它們還用于電視和手機，將數字視頻數據轉換為模擬視頻信號，再連接到屏幕驅動器，以顯示單色或彩色圖像。

FEATURES

microPOWER OPERATION: 115μA at 5V

POWER-ON RESET TO ZERO

POWER SUPPLY: +2.7V to +5.5V

ENSURED MONOTONIC BY DESIGN

SETTLING TIME: 10μs to 1LSB

LOW-POWER SERIAL INTERFACE WITH

SCHMITT-TRIGGERED INPUTS

ON-CHIP OUTPUT BUFFER AMPLIFIER,

RAIL-TO-RAIL OPERATION

SYNC INTERRUPT FACILITY

SOT23-8 AND MSOP-8 PACKAGES

APPLICATIONS

PROCESS CONTROL

DATA ACQUISITION SYSTEMS

CLOSED-LOOP SERVO-CONTROL

PC PERIPHERALS

PORTABLE INSTRUMENTATION

PROGRAMMABLE ATTENUATION

DESCRIPTION

The DAC7513 is a low-power, single, 12-bit buffered voltage

output Digital-to-Analog Connector (DAC). The on-chip precision

output amplifier allows rail-to-rail output swing to be

achieved. The DAC7513 uses a versatile 3-wire serial interface

that operates at clock rates up to 30MHz and is compatible

with standard SPI?, QSPI?, Microwire?, and DSP interfaces.

The DAC7513 requires an external reference voltage to set

the output range of the DAC, this allows the DAC7513 to be

used in a multiplying mode. The DAC7513 incorporates a

power-on reset circuit which ensures that the DAC output

powers up at 0V and remains there until a valid write takes

place to the device. The DAC7513 contains a power-down

feature, accessed over the serial interface, that reduces the

current consumption of the device to 200nA at 5V.

The low-power consumption of this part in normal operation

makes it ideally suited to portable battery-operated equipment.

The power consumption is 0.5mW at 5V reducing to

1μW in power-down mode.

The DAC7513 is available in an SOT23-8 package and an

MSOP-8 package.

SPI and QSPI are registered trademarks of Motorola.

Microwire is a registered trademark of National Semiconductor.