DAC1220E屬于集成電路（IC）的數模轉換器（DAC）。由美國德州儀器公司制造生產的DAC1220E數模轉換器（DAC）數模轉換器（DAC、D/A、D2A 或 D 轉 A）可將數字信號轉換為緩沖或無緩沖的模擬電壓或電流。DAC 架構是否適合特定應用，要取決于分辨率和采樣頻率。DAC 通常用于音樂播放器，將數字?jǐn)?shù)據流轉換為模擬音頻流。它們還用于電視和手機，將數字視頻數據轉換為模擬視頻信號，再連接到屏幕驅動器，以顯示單色或彩色圖像。

1FEATURES

2? 20-Bit Monotonicity Ensured Over –40°C to

+85°C

? Low Power: 2.5mW

? Voltage Output

? Settling Time: 2ms to 0.012%

? Maximum Linearity Error: ±0.0015%

? On-Chip Calibration

APPLICATIONS

? Process Control

? ATE Pin Electronics

? Closed-Loop Servo Control

? Smart Transmitters

? Portable Instruments

DESCRIPTION

The DAC1220 is a 20-bit digital-to-analog (D/A)

converter offering 20-bit monotonic performance over

the specified temperature range. It utilizes

delta-sigma technology to achieve inherently linear performance in a small package at very low power.

The resolution of the device can be programmed to

20 bits for Full-Scale, settling to 0.003% within 15ms

typical, or 16 bits for Full-Scale, settling to 0.012%

within 2ms max. The output range is two times the

external reference voltage. On-chip calibration circuitry dramatically reduces low offset and gain

errors.

The DAC1220 features a synchronous serial

interface; in single-converter applications, the serial

interface can be accomplished with just two wires,

allowing low-cost isolation. For multiple converters, a

CS signal allows for selection of the appropriate D/A

converter.

The DAC1220 has been designed for closed-loop

control applications in the industrial process control

market and high-resolution applications in the test

and measurement market. It is also ideal for remote

applications, battery-powered instruments, and

isolated systems. The DAC1220 is available in an

SSOP-16 package.