CY74FCT2574T屬于集成電路（IC）的觸發器。由美國德州儀器公司制造生產的CY74FCT2574T觸發器觸發器是能夠存儲單個邏輯狀態或信息“位”的基本數字存儲器件。這些器件至少有兩個輸入；一個或多個用于傳遞要存儲的數據，另一個用于指示存儲該數據的時間點。不同的觸發器類型，例如 D（延遲）、SR（置位復位）和 JK，對提供給其輸入的信號有不同的響應，可用于實現不同的邏輯功能。這些器件與鎖存器的不同之處在于它們是邊緣敏感器件，其保持的邏輯狀態僅在接收到有效時鐘信號時才會改變。

Function and Pinout Compatible With FCT

and F Logic

25-Ω Output Series Resistors to Reduce

Transmission-Line Reflection Noise

Reduced VOH (Typically = 3.3 V) Version of

Equivalent FCT Functions

Edge-Rate Control Circuitry for

Significantly Improved Noise

Characteristics

Ioff Supports Partial-Power-Down Mode

Operation

Matched Rise and Fall Times

Fully Compatible With TTL Input and

Output Logic Levels

ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

3-State Outputs

12-mA Output Sink Current

15-mA Output Source Current

Edge-Triggered D-Type Inputs

250-MHz Typical Switching Rate

description

The CY74FCT2574T is a high-speed, low-power, octal D-type flip-flop featuring separate D-type inputs for each

flip-flop. On-chip termination resistors at the outputs reduce system noise caused by reflections. The

CY74FCT2574T can replace the CY74FCT574T to reduce noise in an existing design. This device has 3-state

outputs for bus-oriented applications. A buffered clock (CP) and output-enable (OE) inputs are common to all

flip-flops. The CY74FCT2574T is identical to the CY74FCT2374T, except that on the CY74FCT2574T all

outputs are on one side of the package and all inputs are on the other side. The flip-flops in the CY74FCT2574T

store the state of their individual D inputs that meet the setup-time and hold-time requirements on the low-to-high

CP transition. When OE is low, the contents of the flip-flops are available at the outputs. When OE is high, the

outputs are in the high-impedance state. The state of OE does not affect the state of the flip-flops.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.