CS5155GDR16屬于集成電路（IC）的特殊用途穩壓器。由安森美半導體公司制造生產的CS5155GDR16特殊用途穩壓器該系列產品用于電源控制、某種形式的轉換，適用于特定的復雜應用。因此，各種產品特性集差異較大，包括空燃比傳感器接口、汽車交流發電機電壓調節、DDR 端接、液體透鏡控制、摩托車轉向信號控制、熱電 (peltier) 冷卻器控制、壓電觸覺控制、閥門控制、小型發動機管理等。

The CS5155 is a 5?bit synchronous dual N?Channel buck controller. It is designed to provide unprecedented transient response for today’s demanding high?density, high?speed logic. The regulator operates using a proprietary control method, which allows a 100 ns response time to load transients. The CS5155 is designed to operate over a 4.25?14 V range (VCC) using 12 V to power the IC and 5.0 V as the main supply for conversion.

The CS5155 is specifically designed to power Pentium? II processors and other high performance core logic. It includes the following features: on board, 5?bit DAC, short circuit protection, 1.0 output tolerance, VCC monitor, and programmable Soft Start capability. The CS5155 is backwards compatible with the 4?bit CS5150, allowing the mother board designer the capability of using either the CS5150 or the CS5155 with no change in layout. The CS5155 is available in 16 pin surface mount and DIP packages.

特性 Features

? Dual N?Channel Design

? Excess of 1.0 MHz Operation

? 100 ns Transient Response

? 5?Bit DAC

? Backward Compatible with 4?Bit CS5150/CS5151

? 30 ns Gate Rise/Fall Times

? 1.0 DAC Accuracy

? 5.0 V & 12 V Operation

? Remote Sense

? Programmable Soft Start

? Lossless Short Circuit Protection

? VCC Monitor

? 25 ns FET Nonoverlap Time

? Adaptive Voltage Positioning

? V2? Control Topology

? Current Sharing

? Overvoltage Protection