CLC006BM/NOPB屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的CLC006BM/NOPB驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1FEATURES

2? No External Pull-down Resistors

? Adjustable Output Amplitude

? Differential Input and Output

? Low Power Dissipation

? Single +5V or ?5.2V Supply

? Replaces GS9008 in Most Applications

APPLICATIONS

? Digital Routers and Distribution Amplifiers

? Coaxial Cable Driver for Digital Transmission

Line

? Twisted Pair Driver

? Serial Digital Video Interfaces for the

Commercial and Broadcast Industry

? SMPTE, Sonet/SDH, and ATM Compatible

Driver

? Buffer Applications

KEY SPECIFICATIONS

? 650 ps Rise and Fall Times

? Data Rates to 400 Mbps

? 200 mV Differential Input

? Low Residual Jitter (25 pspp)

DESCRIPTION

Texas Instruments' Comlinear CLC006 is a

monolithic, high-speed cable driver designed for the

SMPTE 259M serial digital video data transmission

standard. The CLC006 drives 75Ω transmission lines

(Belden 8281 or equivalent) at data rates up to 400

Mbps. Controlled output rise and fall times (650 ps typical) minimize transition-induced jitter. The output

voltage swing, typically 1.65V, set by an accurate,

low-drift internal bandgap reference, delivers an 800

mV swing to back-matched and terminated 75Ω

cable. Output swing is adjustable from 0.7 VP-P to 2

VP-P using external resistors.

The CLC006’s class AB output stage consumes less

power than other designs, 185 mW with both outputs

terminated, and requires no external bias resistors.

The differential inputs accept a wide range of digital

signals from 200 mVP-P to ECL levels within the

specified common-mode limits. All this make the

CLC006 an excellent general purpose high speed

driver for digital applications.

The CLC006 is powered from a single +5V or ?5.2V

supply and comes in an 8-pin SOIC package.