描述 Description

The CL8800 is designed to drive a long string of inexpensive, low current LEDs directly from the AC mains. A basic driver circuit consists of the CL8800, six resistors, and a bridge rectifier. Two to four additional components are optional for various levels of transient protection. No capacitors, EMI filters, or power factor correction circuits are needed.A string of series/parallel LEDs is tapped at six locations. Six linear current regulators sink current at each tap and are sequentially turned on and off, tracking the input sine wave voltage. Voltage across each regulator is minimized when conducting, providing high efficiency. Output current at each tap is individually resistor-adjustable. Cross-regulation, as the CL8800 switches from one regulator to another, provides smooth transitions. The current waveform can be tailored to optimize for input voltage range, line/load regulation, output power/current, efficiency, power factor, THD, dimmer compatibility, and LED utilization.With the addition of an RC network, the driver is compatible with phase dimming.

特性 Features

Minimal component count (base config: CL8800 + 6 resistors + diode bridge)
No magnetics, no capacitors
Up to 7.5W output (13W w/ heat sink)
>110Lm/W using efficient LEDs
85% typical electrical efficiency
>0.95 power factor
Low conducted EMI w/o filters
85% LED luminous utilization
Phase dimmer compatible with an RC network

簡介

CL8800屬于集成電路（IC）的LED驅動器。由制造生產的CL8800LED 驅動器器件屬于 LED 驅動器電源管理集成電路 (PMIC) 系列，可通過標稱固定電壓的電源為負載（通常為發光二極管）提供電流，并且電流可控。它與用于電壓調節的類似產品的主要區別在于，這類器件提供較低的反饋電壓（以提高系統能效），而且通常可對器件工作點進行外部控制，可在照明應用中用于實現調光功能。