描述 Description

The CAT1021 is a complete memory and supervisory solution for microcontroller based systems. A 2 k-bit serial EEPROM memory and a system power supervisor with brown-out protection are integrated together in low power CMOS technology. Memory interface is via a 400 kHz I2C bus.The CAT1021 provides a precision VCC sense circuit and two open drain outputs: one (RESET) drives high and the other (RESET) drives low whenever VCC falls below the reset threshold voltage. The CAT1021 also has a Write Protect input (WP). Write operations are disabled if WP is connected to a logic high.The supervisor has a 1.6 second watchdog timer circuit that resets a system to a known state if software or a hardware glitch halts or 'hangs' the system. The watchdog timer monitors the SDA signal.The power supply monitor and reset circuit protect memory and system controllers during power up/down and against brownout conditions. Five reset threshold voltages support 5.0 V, 3.3 V and 3.0 V systems. If power supply voltages are out of tolerance reset signals become active, preventing the system microcontroller, ASIC or peripherals from operating. Reset signals become inactive typically 200 ms after the supply voltage exceeds the reset threshold level. With both active high and low reset signals, interface to microcontrollers and other ICs is simple. In addition, the RESET pin or a separate input, MR, can be used as an input for push-button manual reset capability.The on-chip, 2 k-bit EEPROM memory features a 16-byte page. In addition, hardware data protection is provided by a VCC sense circuit that prevents writes to memory whenever VCC falls below the reset threshold or until VCC reaches the reset threshold during power up.Available packages include an 8-pin DIP, 8-pin SOIC, 8-pin TSSOP, 8-pin TDFN and 8-pin MSOP. The TDFN packa

特性 Features

? Precision power supply voltage monitor - 5.0 V, 3.3 V and 3.0 V systems - Five threshold voltage options
? Watchdog timer
? Active high or low reset - Valid reset guaranteed at VCC = 1 V
? 400 kHz I2C bus
? 3.0 V to 5.5 V operation
? Low power CMOS technology
? 16-Byte page write buffer
? Built-in inadvertent write protection — WP pin
? 1,000,000 Program/Erase cycles
? Manual reset input
? 100 year data retention
? 8-pin DIP, SOIC, TSSOP, MSOP or TDFN (3 x 3 mm foot-print) packages — TDFN max height is 0.8mm
? Industrial and extended temperature ranges

應用 Application

? Industrial control
? Medical systems
? Printers
? Mass storage

簡介

CAT1021屬于集成電路（IC）的監控器。由制造生產的CAT1021監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。