BQ2016DBQ屬于集成電路（IC）的電池管理。由美國德州儀器公司制造生產的BQ2016DBQ電池管理電池管理 PMIC（電源管理集成電路）系列產品可用于電池相關的監測和控制功能，包括身份驗證、電池平衡、狀態監測、電量計量、電源選擇、短路保護、過壓和欠壓保護等等。請注意，雖然該系列中的某些產品可能包括電池充電功能，但將充電功能作為主要功能的產品是單獨分類的。

Provides Accurate Measurement of

Available Capacity in Nicd or NiMH

Batteries

Measures a Wide Dynamic-Current Range

Requires ≤ 1 Square Inch of PCB Space for

Easy Pack Integration

Measures Charge Flow Using a Low-Offset

V-to-F Converter

Automatically Compensates Measurements

for Rate and Temperature

Supports 5 LEDs for Remaining Capacity

Indication

Provides a 1-Wire HDQ Communication

Interface

Packaging: 28-Pin SSOP

description

The bq2016 gas gauge IC for battery pack or in-system installation maintains an accurate record of available

battery capacity. To integrate charge and discharge activity of the battery, the IC monitors a voltage drop across

a sense resistor connected in series with the cells of the battery. The bq2016 compensates for battery

temperature, charge/discharge rate, and battery self-discharge to the charge counter to provide availablecapacity

information across a wide range of operating conditions. The bq2016 works with NiCd or NiMH battery

packs that have a capacity of 1 to 4.5 Ah and that are designed for high discharge rate applications such as

power tools.

The VPFC input sets the initial full charge reference of the battery pack. The bq2016 learns the true discharge

capacity of the battery pack and automatically updates the full-charge reference during the course of a

discharge cycle from full to empty. The remaining capacity is reported as the ratio between the actual discharge

capacity and the full-charge capacity. The bq2016 communicates available capacity using 5 LEDs or the 1-wire

communications port.

The 1-wire serial communication port (5Kb/s) allows an external processor to read and write the internal

registers of the bq2016. Communication with the bq2016 is useful for pack testing or host processing of the

available battery information. The internal registers include available battery capacity, voltage, temperature,

current, and battery status. The RBI input maintains the register set in the event of pack voltage collapse due

to a high discharge pulse.

The bq2016 circuit can operate from the cells in the pack. The REG output and an external FET provide a simple,

inexpensive voltage regulator to supply power to the circuit from the cells