特性 Features

ESD/Surge Protection for 1 Line with

Unidirectional.

Provide ESD protection for each line to

IEC 61000-4-2 (ESD) ±30kV (air / contact)

IEC 61000-4-5 (Lightning) 70A (8/20μs)

For operating voltage of 3.3V and below

1.6mm x 1.0mm DFN package saves board

space

High surge protection

Fast turn-on and Low clamping voltage

Solid-state silicon-avalanche and active circuit

triggering technology

Green Part

AEC-Q101 qualified

Applications

Power Line Protection

Power Management Systems

Hand Held Portable Applications

Mobile Device Applications

Control Signal Lines Protection

Microprocessors Protection

Latchup Protection

描述 Description

AZ9313-01F is a design which includes a

unidirectional ESD rated clamping cell to protect

one power line, or one control line, or one low

speed data line in an electronic systems. The

AZ9313-01F has been specifically designed to

protect sensitive components which are

connected to power and control lines from

over-voltage damage and latch-up caused by

Electrostatic Discharging (ESD), Lightning, and

Cable Discharge Event (CDE).

AZ9313-01F is a unique design which

includes proprietary clamping cell in a single

package. During transient conditions, the

proprietary clamping cell prevents over-voltage

on the power line or control/data lines, protecting

any downstream components.

AZ9313-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).