特性 Features

? ESD protection for one line with bi-directional

? Provide transient protection for the protected

line to

IEC 61000-4-2 (ESD) ±15kV (air) / ±13kV (contact)

IEC 61000-4-5 (Lightning) 4A (8/20μs)

? Ultra-low capacitance: 0.15pF typical

? For low operating voltage applications: 1.5V

and below

? 0201 small DFN package saves board space

? Fast turn-on and low clamping voltage

? Solid-state silicon-avalanche and active circuit

triggering technology

? Green part

Applications

? USB4 interface

? Thunderbolt interface

? USB3.1 and USB3.0 interfaces

? USB Type-C interface

? Handheld portable applications

? Consumer electronics

描述 Description

AZ5B9S-01F is a design which includes a

bi-directional ESD rated clamping cell to protect

high-speed data interfaces in an electronic

system. The AZ5B9S-01F has been specifically

designed to protect sensitive components which

are connected to data and transmission lines

from over-voltage caused by Electrostatic

Discharging (ESD), Lightning, and Cable

Discharge Event (CDE).

AZ5B9S-01F is a unique design which includes

proprietary clamping cell with ultra-low

capacitance in a small package. During transient

conditions, the proprietary clamping cell prevents

over-voltage on the control/data lines, protecting

any downstream components.

AZ5B9S-01F is bi-directional and may be used

on lines where the signal swings above and

below ground.

AZ5B9S-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(?15kV air, ?8kV contact discharge).