特性 Features

ESD protection for one line with bi-direction

Provide transient protection for the protected

line to

IEC 61000-4-2 (ESD) ±15kV (air) / ±12kV (contact)

IEC 61000-4-5 (Lightning) 6.5A (8/20μs)

Ultra-low capacitance: 0.2pF typical

For low operating voltage applications: 2.0V

and below

0402 small DFN package saves board space

Fast turn-on and low clamping voltage

Solid-state silicon-avalanche and active circuit

triggering technology

Green part

Applications

2.5G/5G/10GbE

Thunderbolt interface

USB3.1 and USB3.0 interfaces

USB Type-C interface

DisplayPort interface

Hand held portable applications

描述 Description

AZ522S-01F is a design which includes a

bi-directional ESD rated clamping cell to protect

high-speed data interfaces in an electronic

system. The AZ522S-01F has been specifically

designed to protect sensitive components which

are connected to data and transmission lines

from over-voltage caused by Electrostatic

Discharging (ESD), Lightning, and Cable

Discharge Event (CDE).

AZ522S-01F is a unique design which includes

proprietary clamping cell with ultra-low

capacitance in a small package. During transient

conditions, the proprietary clamping cell prevents

over-voltage on the control lines, or data lines,

protecting any downstream components.

AZ522S-01F is bi-directional and may be used

on lines where the signal swings above and

below ground.

AZ522S-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).