特性 Features

ESD/Surge protection for one line with

bi-directional

Provide transient protection for one line to

IEC 61000-4-2 (ESD) ±30kV (air / contact)

IEC 61000-4-4 (EFT) 80A (5/50ns)

IEC 61000-4-5 (Lightning) 180A (8/20μs)

For operating voltage of 3.3V and below

1.6mm x 1.0mm DFN package saves board

space

High surge protection

Fast turn-on and low clamping voltage

Solid-state silicon-avalanche and active circuit

triggering technology

Green part

Applications

Power line protection

Audio protection

Mobile phones

Hand held portable applications

描述 Description

AZ3603-01F is a design which includes a

bi-directional surge rated clamping cell to protect

one power line, or one control line, or one

low-speed data line in an electronic system. The

AZ3603-01F has been specifically designed to

protect sensitive components which are

connected to power and control lines from

over-voltage damage and latch-up caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ3603-01F is a unique design which includes

proprietary clamping cell in a single package.

During transient conditions, the proprietary

clamping cell prevents over-voltage on the power

line or control/data lines, protecting any

downstream components.

AZ3603-01F is bi-directional and may be used on

lines where the signal swings above and below

ground.

AZ3603-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).