AZ2025-04S屬于電路保護的TVS-二極管。由晶焱科技股份有限公司制造生產的AZ2025-04STVS - 二極管TVS 二極管是一種半導體器件，可用于限制或阻止特定電壓電平的浪涌。該系列產品使用二極管（只能單向?qū)щ姷脑骷┻M行設計。TVS 是 Transient Voltage Suppression/Suppressor（瞬態電壓抑制/抑制器）的首字母縮寫。類型包括轉向（軌至軌）或齊納，具有單向通道、雙向通道、電壓 – 反關態、電壓 – 擊穿、電壓 – 箝位、電流 – 峰值脈沖、功率 – 峰值脈沖和電源線路保護等特征。

特性 Features

ESD Protect for 4 Lines with Bi-directional

Provide ESD protection for the protected line to

IEC 61000-4-2 (ESD) ±20kV (air), ±12kV (contact)

IEC 61000-4-4 (EFT) 40A (5/50ns)

IEC 61000-4-5 (Lightning) 7A (8/20μs)

Cable Discharge Event (CDE)

Small SOT23-5L package saves board space

Protect four I/O lines or four power lines

Fast turn-on and Low clamping voltage

Low operating voltage: < 5V

Solid-state silicon-avalanche and active circuit

triggering technology

Green part available

Applications

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

Latchup Protection

描述 Description

AZ2025-04S is a design which includes four

bi-directional surge rated clamping cells to

protect four power lines, or four control lines, or

four low speed data lines in an electronic

systems. The AZ2025-04S has been specifically

designed to protect sensitive components which

are connected to power and control lines from

over-voltage damage and latch-up caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ2025-04S is a unique design which includes

proprietary clamping cells in a single package.

During transient conditions, the proprietary

clamping cells prevent over-voltage on the power

lines or control/data lines, protecting any

downstream components.

AZ2025-04S is bi-directional and may be used on

lines where the signal swings above and below

ground.

AZ2025-04S may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).