特性 Features

ESD Protect for 8 high-speed I/O channels

Provide ESD protection for each channel to

IEC 61000-4-2 (ESD) ±15kV (air), ±12kV (contact)

IEC 61000-4-5 (Lightning) 5A (8/20ms)

For low operating voltage of 3.3V and below

Ultra low capacitance: 0.5pF typical

Fast turn-on and Low clamping voltage

Array of ESD rated diodes with internal

equivalent TVS (Transient Voltage

Suppression) diode

Solid-state silicon-avalanche and active circuit

triggering technology

Simplified layout for high-speed differential

signaling channels

Green Part

Applications

High Definition Multi-Media Interface (HDMI)

1.3, 1.4 and 2.0 version

DisplayPort interface

SATA and eSATA interface

V-By-One

LVDS interfaces

Ethernet port: 10/100/1000 Mb/s

描述 Description

AZ1043-08F is a design which includes ESD

rated clamping cell arrays to protect high speed

data interfaces. The AZ1043-08F has been

specifically designed to protect sensitive

components which are connected to data and

transmission lines from over-voltage caused by

Electrostatic Discharging (ESD).

AZ1043-08F is a unique design which includes

ESD rated, ultra low capacitance steering diodes

and a unique design of clamping cell which is an

equivalent TVS diode in a single package. During

transient conditions, the steering diodes direct

the transient to either the internal ESD line or

ground line. The internal unique design of

clamping cell prevents over-voltage on the

internal ESD line and on the I/O line, which is

protecting any downstream components.

AZ1043-08F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).