FEATURES

Resolutions and cable lengths

Typical resolutions achievable include:

720p: 1280 x 720 x 60Hz at 300m.

1080p:1920 x 1200 x 60Hz at 100m.

Audio

CD quality stereo audio is supported.

EDID display information

The module contains a default set of

EDID information that supports display

resolutions up to 1920x1080 @ 60Hz.

In addition, the module will check during

power up whether alternative EDID

information is available from the KVM

switch or extender that is connected to

port A. If required, you can also harvest

and store new EDID information from

your display (Read and Store).

Power

The ALAV102T uses a USB port to

derive its power from the host computer,

dispensing with the need for a separate

power supply, thus simplifying installation.

The USB cable must always be connected

to a USB port on the computer that is

capable of providing up to 300mA.

Small footprint

The ALAV102T has been designed to

use minimal space around your host

systems, allowing you to neatly locate the

transmitter. moulded cables also reduce

cable clutter, keeping the device easily

accesable at all times.

RS232 for disabling/re-enabling receiver

connections

Using the onboard RS232 interface,

individual transmission paths can be

disconnected allowing remote screens to

sleep, and wake on re-connection. This

saves power and screen hours in use.

Using a KVM over IP device such as the

AVX5016, you can directly control up

to 32 individual transmission paths from

anywhere in the world.

AV-KVM Port

ALAV102T is the first ADDERLink

transmitter to feature AV-KVM ports.

These ports allow you to connect directly

to a KVM extender. This allows you to add

additional devices such as touch screens

and keyboards.