描述 Description

The SAM HA0E15A-MZT-B is a low-power automotive system-in-package (SiP) product using the 32-bit Arm? Cortex? M0+ processor featuring 32 pins with 32 KB of Flash, 1 KB of read-while-write data flash, and 4 KB of SRAM. The SAM HA0 devices operate at a maximum frequency of 48MHz and reach 2.46 Coremark/MHz. They also include a LIN system basis chip (SBC) with a fully integrated LIN transceiver designed in compliance with the LIN specifications 2.0, 2.1, 2.2, 2.2A, ISO 17987-4 and SAEJ2602-2, and a 3.3V/85mA voltage regulator. It is qualified for up to 115°C Tc.

特性 Features

Processor
? Arm Cortex-M0+ CPU running at up to 48MHz
? Single-cycle hardware multiplier
? Micro trace buffer
Memories
? 32KB in-system self-programmable Flash
? 1KB Read-While-Write (RWW) Flash section
? 4KB SRAM memory
System
? Power-on reset (POR) and brown-out detection (BOD)
? Internal and external clock options with 48 MHz digital frequency locked loop (DFLL48M)
? 48 MHz to 96 MHz fractional digital phase locked loop (FDPLL96M)
? External interrupt controller (EIC)
? 13 external interrupts
? One non-maskable interrupt
? Two-pin serial wire debug (SWD) programming, test and debugging interface
Low power
? Idle and standby sleep modes
? SleepWalking peripherals
Peripherals
? 8-channel direct memory access controller (DMAC)
? 12-channel event system
Two 16-bit timer/counters (TC), configurable as either:
? One 16-bit TC with compare/capture channels
? One 8-bit TC with compare/capture channels
? One 32-bit TC with compare/capture channels, by using two TCs
Three 16-bit timer/counters for control (TCC), with extended functions:
? Up to four compare channels with optional complementary output
? Generation of synchronized pulse width modulation (PWM) pattern across port pins
? Deterministic fault protection, fast decay and configurable dead-time between complementary output
? Dithering for enhancing resolution with up to 5-bit and reduce quantization error
32-bit real time counter (RTC) with clock/calendar function
Watchdog timer (WDT)
CRC-32 generator
Four serial communication interfaces (SERCOM), each configurable to operate as either:
? USART with full-duplex and single-wire half-duplex configuration
? I2C up to 3.4MHz
? SPI
One 12-bit, 350ksps analog-to-digital converter (ADC) with up to 6 channels
? Differential and single-ended input
? 1/2x to 16x programmable gain stage
? Automatic offset and gain error compensation
? Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution
10-bit, 350ksps digital-to-analog converter (DAC)
One analog comparators (AC) with window compare function
Packages
? 32-pin QFN
Operating voltage
? 2.7V to 3.63V
Built-in safety features
? CRC calculations on flash memory to detect errors
? Peripheral Access Controller to prevent accidental writes to configuration registers
? Two independent voltage monitors: BOD33 and Voltage check on Lin SBC
? Voltage monitoring for VS
? Power-on Reset for a controlled startup
? TXD dominant timeout timer
? Overtemperature Detection