General Description

The AP4310 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies.

The device contains two OpAmps and a 2.5V preci sion shunt voltage reference. Op Amp 1 is designed for voltage control with its non-inverting input internally connects to the output of the shunt regulator. Op Amp 2 is for current control with both inputs uncommitted. The IC offers the power converter designer a control solution that features increased precision with a corresponding reduction in system complexity and cost.

The AP4310 is available in standard packages of DIP-8 and SOIC-8.

Features

Op Amp

· Input Offset Voltage: 0.5mV

· Supply Current: 75μA per Op Amp at 5.0V Supply Voltage

· Unity Gain Bandwidth: 1MHz

· Output Voltage Swing: 0 to (VCC -1.5) V

· Power Supply Range: 3 to 36V

Voltage Reference

· Fixed Output Voltage Reference: 2.5V

· Voltage Tolerance: ± 0.4, ± 1

· Sink Current Capability: 0.05 to 80mA

· Typical Output Impedance: 0.2?

Applications

· Battery Charger

· Switching Power Supply