特性 Features

? eDP receiver

- Integrated high-speed DP-Rx compliant with DisplayPort standard eDP v1.4

- Up to 2 lanes @2.7Gbps, 2.16Gbps, 2.43Gbps and 1.62Gbps

- PSR/MBO/PSR2 function through built-in SRAM

? Source IC interface: CEDS/iSP/EPI/ATPI

- Up to 12 pairs to support 6-channel 2D/1C or 12-channel 1D/1C configuration

- CEDS/iSP/EPI/ATPI transmitter up to 2.0Gbps configuration

- Various swap modes: inter-port swap, intraport swap, p/n swap, RGB swap, odd/even pixel swap, etc.

- Scan direction swap

- Supports Z-inversion (column inversion), and Nline inversion

- Dual gate mode combined with Z-inversion and non-Z inversion mode

- CEDS/iSP/EPI/ATPI test pattern mode

? TCON functions

- HD (1366x768), HD+ (1600x900), FHD (1920x1080), 1920x1280

- eDP TCON color depth: 18/24bpp input (30bpp input for HDR), 18/24bpp output

- Programmable fail-safe mode control

- Configurable BIST pattern

- 10-bit Gamma correction table for each color

- Multiple FRC pattern configurations

- 8bit->6bit, 9bit->6bit, 10bit->8bit and 10bit->6bit FRC modes

- 0-D dimming control (DBC) function for backlight low power

- Color-engine for hue and saturation control

- LCD overdrive to reduce motion blur in highperformance mode

- Direct drive G-sync, Free sync, and Adaptive sync

- eDP sDRRS power saving function

- Splash-screen feature

- In-cell Touch function combined with PSR

- Microsoft/Wacom In-cell timing requirement

? On-chip SSCG

- CEDS/EPI/iSP/ATPI 1.6G ＜Fceds ≤2G (Max. +/-0.5% with 0.25% step, 10/20/30/40KHz, center spreading)

- CEDS/EPI/iSP/ATPI Fceds≤1.6G (Max. +/-1% with 0.25% step, 10/20/30/40KHz, center spreading)

? Intel HDR400

- EOTF ST.2084 Decoder

- BT.2020 to sRGB color space mapping

- 10-bit input and 8-bit output

- DPCD handshake

? Pattern detection

? EEPROM shared for EDID and configuration

? In-cell touch support for Microsoft and Wacom

? PWM generator, PWM pass-through and PWM product modes

? TSMC 28nm HPC+ process

? Lowest power from 60mW to 80mW (depending on whether PSR is on or off)

? Power supply: 1.8V/0.9V (internal 3.3V for HPD)

? Package: BGA-91 (5x9mm), LGA-74 (5x12mm)