ADXL359BCCZ-RL7屬于傳感器變送器的運動傳感器-加速計。由亞德諾半導體技術有限公司制造生產的ADXL359BCCZ-RL7運動傳感器 - 加速計加速度計用于檢測并響應運動或振動等加速度的變化。加速度計類型有 X、Y 或 Z 軸上的模擬或數字加速度計，加速度范圍為 ±0.5 g 至 ±2000 g，靈敏度為 1 至 500 k (LSB/g)，輸出類型有模擬電壓、藍牙、數字、DSI、IEPE、I2C、PCM、PWM、射頻和 SPI。

GENERAL DESCRIPTION

The digital output ADXL3591 is a low noise density, low 0 g offset

drift, low power, 3-axis microelectromechanical system (MEMS)

accelerometer with selectable measurement ranges. The ADXL359

supports the ±10 g, ±20 g, and ±40 g ranges.

The ADXL359 offers industry leading noise, minimal offset drift over

temperature, and long-term stability, enabling precision applications

with minimal calibration.

The low drift, low noise, and low power ADXL359 enables accurate

tilt measurement in an environment with high vibration, such as

airborne inertial measurement units (IMUs). The low noise over

higher frequencies is ideal for wireless condition monitoring.

The ADXL359 multifunction pin names may be referenced only by

their relevant function for either the serial peripheral interface (SPI)

or limited I2C interface.

FEATURES

? 0 g offset vs. temperature (all axes): 0.45 mg/°C typical

? Ultralow noise density (all axes): 80 μg/√Hz

? Low power, VSUPPLY (LDO enabled)

? In measurement mode: 200 μA

? In standby mode: 21 μA

? Digital output features

? Digital SPI and limited I2C interfaces supported

? 20-bit ADC

? Data interpolation routine for synchronous sampling

? Programmable high-pass and low-pass digital filters

? Integrated temperature sensor

? Voltage range options

? VSUPPLY with internal regulators: 2.25 V to 3.6 V

? V1P8ANA, V1P8DIG with internal LDO regulator bypassed: 1.8 V

typical ± 10

? Operating temperature range: ?40°C to +125°C

? 14-terminal, 4 mm × 4 mm × 1.04 mm, LGA package

APPLICATIONS

? IMUs and altitude and heading reference systems (AHRSs)

? Platform stabilization systems

? Vibration sensing

? Structural health monitoring

? Tilt sensing

? Robotics

? Condition monitoring