ADS7807PB屬于集成電路（IC）的模數轉換器（ADC）。由美國德州儀器公司制造生產的ADS7807PB模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

FEATURES

35mW max POWER DISSIPATION

50μW POWER-DOWN MODE

25μs max ACQUISITION AND CONVERSION

±1.5LSB max INL

DNL: 16 Bits, No Missing Codes

86dB min SINAD WITH 1kHz INPUT

±10V, 0V TO +5V, AND 0V TO +4V INPUT RANGES

SINGLE +5V SUPPLY OPERATION

PARALLEL AND SERIAL DATA OUTPUT

PIN-COMPATIBLE WITH THE 12-BIT ADS7806

USES INTERNAL OR EXTERNAL REFERENCE

0.3 DIP-28 AND SO-28

DESCRIPTION

The ADS7807 is a low-power, 16-bit, sampling Analog-to-

Digital (A/D) converter using state-of-the-art CMOS structures.

It contains a complete 16-bit, capacitor-based, Successive

Approximation Register (SAR) A/D converter with

sample-and-hold, clock, reference, and microprocessor interface

with parallel and serial output drivers.

The ADS7807 can acquire and convert 16 bits to within

±1.5LSB in 25μs max while consuming only 35mW max.

Laser trimmed scaling resistors provide standard industrial

input ranges of ±10V and 0V to +5V. In addition, a 0V to +4V

range allows development of complete single-supply systems.

The ADS7807 is available in a 0.3 DIP-28 and SO-28, both

fully specified for operation over the industrial –40°C to

+85°C temperature range.