ADP5588ACPZ-R7屬于集成電路（IC）的專用。由亞德諾半導體技術有限公司制造生產的ADP5588ACPZ-R7專用該系列產品可提供所需的功能，用以將信息源/信宿連到各種復雜或范圍狹窄應用中的傳感器、變送器、致動器、傳輸介質或其他此類端點。例如，汽車安全氣囊驅動器、車身控制和信息娛樂總線、自適應電纜均衡器、智能卡等等。

GENERAL DESCRIPTION

The ADP5588 is an I/O port expander and keypad matrix

designed for QWERTY type phones that require a large keypad

matrix and expanded I/O lines. I/O expander ICs are used in

mobile platforms as a solution to the limited number of GPIOs

available in the main processor. In its small 4 mm × 4 mm package, the ADP5588 contains

enough power to handle all key scanning and decoding and flag

the processor of key presses and releases via the I2C? interface

and interrupt. It frees the main microprocessor from having to monitor the keypad, thereby minimizing current drain and

increasing processor bandwidth. It is also equipped with a buffer/FIFO and key event counter to handle and keep track of up to 10 unprocessed key or GPI events with overflow wrap and interrupt capability. The ADP5588 has a keylock capability with an option to trigger

or not trigger an interrupt at key presses and releases. All com-

munication to the main processor is done using one interrupt line

and two I2C-compatible interface lines. The ADP5588 can be

configured to have a keypad matrix of up to 8 rows × 10 columns

(a maximum of 80 keys).

When used for smaller keypad matrices, unused row and column pins can be reconfigured to act as general-purpose

inputs, outputs, or light sensor inputs. R0, R1, R2, R3, R4, R5, R6,

and R7 denote the row pins of the matrix, while C0, C1, C2, C3,

C4, C5, C6, C7, C8, and C9 denote the column pins. At power-up, all rows and columns default as GPIs and must be programmed to

function as part of the keypad matrix, GPOs, or light sensor inputs. In addition to keypad and GPIO functionalities, C8 and C9 can

also be configured as light sensor inputs. When configured as keypad lines, the function of the C8 and

C9 lines is straightforward: the control interface disconnects

these lines from the comparator inputs, disables the light sensor comparator, and connects them to the keypad columns of the

keypad matrix. When used as light sensor comparator inputs, the control interface disconnects these pins from the keypad,

enables the comparators, and connects these lines to the com-

parator inputs. Two external capacitors (0.1 μF) are required when these pins are configured as light sensor inputs. When used as GPIOs, these pins are removed from the keypad and the light sensor interface, and the light sensor comparators are disabled, along with the logic for the sensors.

FEATURES 18-GPIO port expander or 10 × 8 keypad matrix

GPIOs configurable to GPIs, GPOs, and keypad rows or

columns Dual light sensor inputs (C8 and C9) I2C interface I2C register read autoincrement

1.8 V to 3.0 V operation

Keypad lock capability

Open-drain interrupt output Key press and key release interrupts

GPI interrupt with level programmability Programmable pull-ups

Key event counter with overflow interrupt

50 μs debounce on the reset line and GPIs

1 μA typical idle current, 55 μA typical polling current drain for one key press

Small 4 mm × 4 mm LFCSP package

APPLICATIONS

Keypad and I/O expander designed for QWERTY type phones that require a large keypad matrix