GENERAL DESCRIPTION

The ADG1208 and ADG1209 are monolithic, iCMOS? analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG1208 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1, and A2. The ADG1209 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched off. When on, each channel conducts equally well in both directions and has an input signal range that extends to the supplies.

The iCMOS (industrial CMOS) modular manufacturing process combines high voltage CMOS (complementary metal oxide semiconductor) and bipolar technologies. It enables the development of a wide range of high performance analog ICs capable of 33 V operation in a footprint that no other generation of high voltage parts has been able to achieve. Unlike analog ICs using conventional CMOS processes, iCMOS components can tolerate high supply voltages while providing increased performance, dramatically lower power consumption, and reduced package size.

FEATURES

<1 pC charge injection over full signal range

1 pF off capacitance

33 V supply range

120 Ω on resistance

Fully specified at ±15 V/+12 V

3 V logic compatible inputs

Rail-to-rail operation

Break-before-make switching action

Available in 16-lead TSSOP, 4 mm × 4 mm LFCSP_VQ, and 16-lead SOIC

Typical power consumption < 0.03 μW

APPLICATIONS

Audio and video routing

Automatic test equipment

Data-acquisition systems

Battery-powered systems

Sample-and-hold systems

Communication systems