AD7794屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7794模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7794/AD7795 are low power, low noise, complete analog front ends for high precision measurement applications. They contain a low noise, 24-/16-bit ∑-Δ ADC with six differential inputs. The on-chip low noise instrumentation amplifier means that signals of small amplitude can be interfaced directly to the ADC.

FEATURES

Up to 23 effective bits

RMS noise: 40 nV @ 4.17 Hz, 85 nV @ 16.7 Hz

Current: 400 μA typical

Power-down: 1 μA maximum

Low noise, programmable gain, instrumentation amp

Band gap reference with 4 ppm/°C drift typical

Update rate: 4.17 Hz to 470 Hz

Six differential analog inputs

Internal clock oscillator

Simultaneous 50 Hz/60 Hz rejection

Reference detect

Programmable current sources

On-chip bias voltage generator

Burnout currents

Low-side power switch

Power supply: 2.7 V to 5.25 V

Temperature range:

B grade: –40°C to +105°C

C grade: –40°C to +125°C

Independent interface power supply

24-lead TSSOP

3-wire serial interface

SPI?, QSPI?, MICROWIRE?, and DSP compatible

Schmitt trigger on SCLK

APPLICATIONS

Temperature measurement

Pressure measurement

Weigh scales

Strain gage transducers

Gas analysis