AD7694屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7694模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7903 is a dual 16-bit, successive approximation, analog to-digital converter (ADC) that operates from a single power supply, VDDx, per ADC. It contains two low power, high speed, 16-bit sampling ADCs and a versatile serial port interface (SPI). On the CNVx rising edge, the AD7903 samples the voltage difference between the INx+ and INx? pins. The voltages on these pins usually swing in opposite phases between 0 V and VREF. The externally applied reference voltage of the REFx pins (VREF) can be set independently from the supply voltage pins, VDDx. The power of the device scales linearly with throughput.

Using the SDIx inputs, the SPI-compatible serial interface can also daisy-chain multiple ADCs on a single 3-wire bus and provide an optional busy indicator. It is compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic, using the separate VIOx supplies.

The AD7903 is available in a 20-lead QSOP package with operation specified from ?40°C to +125°C.

FEATURES

16-bit resolution with no missing codes

Throughput: 1 MSPS

Low power dissipation

7.0 mW at 1 MSPS (VDD1 and VDD2 only)

12.0 mW at 1 MSPS (total)

140 μW at 10 kSPS

INL: ±0.5 LSB typical, ±2.0 LSB maximum

SINAD: 93.5 dB at 1 kHz

THD: ?112 dB at 1 kHz

True differential analog input range: ±VREF

0 V to VREF with VREF between 2.4 V to 5.1 V

Allows use of any input range

Easy to drive with the ADA4941-1

No pipeline delay

Single-supply 2.5 V operation with 1.8 V/2.5 V/3 V/5 V logic

interface

Serial port interface (SPI)/QSPI/MICROWIRE/DSP compatible

20-lead QSOP package

Wide operating temperature range: ?40°C to +125°C

APPLICATIONS

Battery-powered equipment

Communications

Automated test equipment (ATE)

Data acquisition

Medical instrumentation

Redundant measurement

Simultaneous sampling