AD737JR屬于集成電路（IC）的RMS至DC轉換器。由亞德諾半導體技術有限公司制造生產的AD737JRRMS 至 DC 轉換器RMS 至 DC 轉換器產品族中的產品可用于執行測量時變波形的數學功能，并返回一個與等效穩態 (DC) 值成比例的值，如果將其應用于電阻負載，則會產生相同的功率耗散。這些轉換器通常用于交流電源相關應用中的測量，它們之間以及它們與用于類似終端的其他技術之間的區別在于輸入為非正弦波形時所給出結果的準確性。

GENERAL DESCRIPTION

The AD737 is a low power, precision, monolithic, true rms-to dc converter. It is laser trimmed to provide a maximum error of ±0.2 mV ± 0.3 of reading with sine wave inputs. Furthermore, it maintains high accuracy while measuring a wide range of input waveforms, including variable duty cycle pulses and triac (phase) controlled sine waves. The low cost and small physical size of this converter make it suitable for upgrading the performance of non-rms precision rectifiers in many applications. Compared to these circuits, the AD737 offers higher accuracy at equal or lower cost.

FEATURES

Computes

True rms value

Average rectified value

Absolute value

Provides

200 mV full-scale input range (larger inputs with input scaling)

Direct interfacing with 3? digit CMOS ADCs

High input impedance: 1012 ?

Low input bias current: 25 pA maximum

High accuracy: ±0.2 mV ± 0.3 of reading

RMS conversion with signal crest factors up to 5

Wide power supply range: ±2.5 V to ±16.5 V

Low power: 25 μA (typical) standby current

No external trims needed for specified accuracy

The AD737 output is negative-going; the AD736 is a positive output-going version of the same basic device