AD595AD屬于集成電路（IC）的熱管理。由亞德諾半導體技術有限公司制造生產的AD595AD熱管理熱管理 IC 是根據溫度控制電路電源的半導體器件。這些 IC 的功能包括風扇控制、硬件監(jiān)控器、溫度監(jiān)控系統、熱監(jiān)控器、熱電偶放大器、熱電偶調節(jié)器和溫度計–溫控器。檢測溫度范圍為 -260℃ 至 +1800℃，輸出類型有 I2C、SMBus、低電平有效/高電平有效、模擬電壓、開漏、PWM、SPI、2 線串行和并行–串行。

PRODUCT DESCRIPTION

The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-strapping options allow it to be used as a

linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output.

FEATURES

* Pretrimmed for Type J (AD594) or Type K (AD595) Thermocouples

* Can Be Used with Type T Thermocouple Inputs

* Low Impedance Voltage Output: 10 mV/8C

* Built-In Ice Point Compensation

* Wide Power Supply Range: +5 V to 615 V

* Low Power: <1 mW typical

* Thermocouple Failure Alarm

* Laser Wafer Trimmed to 18C Calibration Accuracy

* Setpoint Mode Operation

* Self-Contained Celsius Thermometer Operation

* High Impedance Differential Input

* Side-Brazed DIP or Low Cost Cerdip